Learn Navisworks Manage (Navigation Reviewing the Model - Clash detective - 4D - 5D - BOQ-Rendering-Animation)
Autodesk Navisworks Manage 2023 Course Contents:
1- Autodesk Navisworks Manage 2023 Introduction
2- Autodesk Navisworks Manage 2023 Navigation
3- Autodesk Navisworks Manage 2023 Reviewing the Models
4- Autodesk Navisworks Manage 2023 Clash Detective
5- Autodesk Navisworks Manage 2023 Timeliner (4D & 5D)
6- Autodesk Navisworks Manage 2023 BOQ Extraction
7- Material Rendering
8- Animation
9- مقدمه
10- مراجعه الموديل واظهار مشاكل وعمل تعليقات
11- اظهار التعارضات بين الاقسام
12-عمل محاكاه مع الخطه الزمنيه للمشروع والتكلفه مع النموزج الثلاثى الابعاد
13-استخراج كميات للمشروع
14-عمل الماتريال للنموزج الثلاثى الابعاد
You will learn how to use Navisworks to review the BIM Model.
You will learn how to use Navisworks to Present the Model to Consultant or Client.
You will learn how to use Navisworks to Make Clash Detective between All Systems.
You will learn how to use Navisworks to Make 4D Simulation.
You will learn how to use Navisworks to Make 5D Simulation.
You will learn how to use Navisworks to Make Quantification (BOQ).
You will learn how to use Navisworks to Make Rendering Shots.
You will learn how to use Navisworks to Make Walkthrough in the building.
You will learn how to use Revit to review the BIM Model
You will learn how to use Revit to Navigate the 3D Model.
You will learn how to use Revit to make sections and 3D views.
You will learn how to use Revit to extract quantities.
You will learn how to use Revit to run clash detection.
ستتعلم مراجعه الموديل
ستتعلم عمل محاكاه بين النموزج الثلاثى الابعاد والخطه للمشروع
ستتعلم اظهار التعارضات بين الاقسام المختلفه
ستتعلم عمل محاكاه مع الخطه وتكلفه المشروع
ستتعلم عمل كميات واستخراجها فى اكسيل شيت
This course designed in Navisworks 2023 but applicable with any Revit version.
If you have any requirements or questions, you will have full support by answering all questions.
This course applicable for any engineering department (Arch - ST - Mechanical - Electrical)
This course applicable for any kind of construction project.
This course is important also for site managers to allow them to review the 3D model and extract any data to help them during installation.
|
1.1
Course Intro
|
02:09 Locked |
|
3.1
Introduction
|
02:03 Locked |
|
4.1
Introduction 2
|
02:28 Locked |
|
5.1
Introduction 3
|
01:38 Locked |
|
6.1
Navigation 1
|
01:00:28 Locked |
|
7.1
Navigation 2
|
59:40 Locked |
| 02:59 Locked |
| 03:09 Locked |
|
10.1
Clash Detection 1
|
01:11:19 Locked |
|
11.1
Clash Detection 2
|
01:26:23 Locked |
|
12.1
4D & 5D Introduction
|
03:17 Locked |
|
15.1
4D For MEP & Arch
|
01:16:55 Locked |
| 01:43:28 Locked |
|
17.1
Autodesk Rendering
|
42:27 Locked |
|
19.1
General Options
|
01:03:50 Locked |
You will learn how to use Navisworks to review the BIM Model
You will learn how to use Navisworks to Present the Model to Consultant or Client.
You will learn how to use Navisworks to Make Clash Detective between All Systems.
You will learn how to use Navisworks to Make 4D Simulation.
You will learn how to use Navisworks to Make 5D Simulation.
You will learn how to use Navisworks to Make Quantification (BOQ).
You will learn how to use Navisworks to Make Rendering Shots.
You will learn how to use Navisworks to Make Walkthrough in the building.
ستتعلم مراجعه الموديل
ستتعلم عمل محاكاه بين النموزج الثلاثى الابعاد والخطه للمشروع
ستتعلم اظهار التعارضات بين الاقسام المختلفه
ستتعلم عمل محاكاه مع الخطه وتكلفه المشروع
ستتعلم عمل كميات واستخراجها فى اكسيل شيت
Show less
